; File Version 071    << DO NOT MODIFY THIS LINE!!! (see below) >>
;******************************************************************
;**                                                              **
;**   Connect Software Async Server Modem Information File       **
;**                                                              **
;**         Copyright (c) 1993 Connect Software.                 **
;**                   All Rights Reserved.                       **
;**                                                              **
;**   MODEM.INI contains information that Connect Software       **
;**   Applications use to talk to specific modems.               **
;**                                                              **
;******************************************************************
;
;------------------------------------------------------------------
;
; DO NOT MODIFY THIS FILE UNLESS YOU ARE POSITIVE THAT YOU KNOW
; WHAT YOU ARE DOING.  INCORRECT MODIFICATIONS TO THIS FILE COULD
; CAUSE YOUR APPLICATION TO BE UNABLE TO CONNECT!
;
; If you DO choose to modify this file you MUST change the 
; 'File Version' number on the first line to '999'.  This will
; prevent this file from overwritten by newer versions.
;
;------------------------------------------------------------------
;
; Modem entries have the following format:
; 
;    [Modem Name]
;    ; Modem commands
;    Init=Modem Reset/Initialization string
;    ToneDial=Modem tone dial string
;    PulseDial=Modem pulse dial string
;
;    ; Modem result strings
;    HangUp=Modem hangup string
;    Error=Invalid modem command result string
;    Connect=Generic modem connect result string
;    Connect300=300 Baud modem connect result string
;    .
;    .
;    Connect9600=9600 Baud modem connect result string
;    NoCarrier=Disconnect/No carrier modem result string
;    NoDialTone=No dialtone modem result string
;    Busy=Busy line modem result string
;    Ok=Result code from modem when a command was executed correctly.
;
; Commands may contain sub-commands, delimited with CRs (^M).  They
; may also contain .5 second pauses '~'.
;
; The following show the modem settings that are used by default.
; If an entry for a specific modem is not given in the MODEM.INI
; file, the default value for that entry as defined below will
; be used in its place.  These settings correspond to a 
; generic Hayes Compatible modem.
;
;    Init=ATE0Q0V1X4&C1&D2 S7=60 S11=55 S0=0^M
;    ToneDial=ATDT
;    PulseDial=ATDP
;    HangUp=~~~+++~~~ATH^M
;    Connect=CONNECT^M
;    Connect300=CONNECT 300
;    Connect1200=CONNECT 1200
;    Connect2400=CONNECT 2400
;    Connect4800=CONNECT 4800
;    Connect9600=CONNECT 9600
;    Busy=BUSY
;    NoDialTone=NO DIALTONE
;    NoCarrier=NO CARRIER
;    Error=ERROR
;    Ok=OK
;    IgnoreCD=0
;
; The Connection family of products from Connect Software require the
; following settings to operate correctly. If you modify this
; file to suit a particular modem that is not listed here,
; or to take adavantage of a feature of your modem that is
; disabled by this file, you must be careful to ensure that
; the following settings do not get disturbed:
;
;    Character Echo
;        The Connection expects the modem to have character
;        echo DISABLED or OFF.  The 'ATE0' command turns
;        character echo off for Hayes compatible modems.
;
;    Result Codes Enabled
;        Result codes from the modem must be ENABLED.  The 
;        'ATQ0' command enables result codes for Hayes Compatible
;        modems.
; 
;    Long Form Result Codes
;       Most modems allow you to use a choose long-form or short-
;       form result codes.  If you choose to enable short-form
;      result codes, you must specify result strings for all
;       possible results.  This is dicouraged.  The Hayes Compatible
;       command for enabling Long Form result codes is 'ATV1'.
; 
;    Extended Result Codes
;       The Connection works better if extended result codes are
;       returned by your modem.  If your modem supports it, it
;       is highly recommended that you enable this feature.  The
;       Hayes Compatible command to enable Extended Result codes is
;      'ATX4'.
; 
;    Data Carrier Detect (DCD)
;       The Connection works best when the DCD tracks the state of 
;       the data carrier from the remote modem.  It is recommended
;       that you enable DCD.  ('AT&C1')
;
;	If your modem does not support tracking of the data
;	carrier (i.e. &C1) then you should set the
;	IgnoreCD=entry to 1 (i.e. IgnoreCD=1).
; 
;    Data Terminal Ready (DTR)
;       You should use the equivalent of the Hayes Compatible 
;      'AT&D2' command to disable auto answer if the modem
;       detects an ON-to-OFF transistion on DTR.
; 
;    Time to wait for connect
;       A 60 second dial timeout is recommended.  For Hayes 
;       Compatible modems the command to set the dial timeout
;       to 60 seconds is ATS7=60.
; 
; COMMON PROBLEMS and POSSIBLE SOLUTIONS
;
;   o If you encounter situations where the phone connection
;     does not get correctly hung up after a failed communications
;     attempt (possibly due to line noise) and you use an internal
;     modem that cannot be reset without powering off the computer,
;     add the string ~~~+++~~~ATH^M~ to the beginning of your Init=
;     string (i.e. Init=~~~+++~~~ATH^M~AT&F^M~ATE0^M).  This causes
;     the modem to hang up the line.  Note that this will slow
;     dialing a bit.
;
;   o 
;
;******************************************************************

[--Direct Connection--]

[Anchor Volksmodem 1200]
Init=ATE0&C1Q0V1X4 S0=0^M
SoftwareECInit=ATE0&C1Q0V1X4 S0=0^M
NoDialTone=NO DIAL TONE

[AT & T DataPort 14.4 FAX Modem]
Init=AT&FE0Q0V1X4&C1&D2&R0&S1\D1\G1%C0 S7=60 S11=55^M
SoftwareECInit=AT&FE0Q0V1X4&C1&D2&R0&S1\D1\G1%C0 S7=60 S11=55^M

[AT&T ComSphere 3810 Paradyne]
Init=AT&F0EOV1X4&C1&D2\Q3 S7=60
SoftwareECInit=AT&F0EOV1X4&C1&D2\Q3 S7=60

[AT&T Model 4000]
Init=ATE0Q0V1X4&C1S7=60 S0=0^M
SoftwareECInit=ATE0Q0V1X4&C1S7=60 S0=0^M

[ATI 2400 etc]

[Avatech 2400E]
NoDialTone=NO DIAL TONE

[Boca 14.4 FAX MODEM int]
Init=AT&FV1E0Q0X4&C1&D2&K3 S7=60 S11=55 S0=0^M
SoftwareECInit=AT&FV1E0Q0X4&C1&D2&K3 S7=60 S11=55 S0=0^M

[Boca Modem Ultra 14.4 kbs ex]
Init=AT&FV1E0Q0X4&C1&D2&K3 S7=60 S11=55 S0=0^M
SoftwareECInit=AT&FV1E0Q0X4&C1&D2&K3 S7=60 S11=55 S0=0^M

[Cardinal 2400 MNP]
Init=AT&FV1E0Q0V1X4S7=60 S11=55^M
SoftwareECInit=AT&FV1E0Q0V1X4S7=60 S11=55^M
NoDialTone=NO DIAL TONE
NoCarrier=NO ANSWER

[Cardinal 9600 V.32]
Init=AT&FV1E0Q0X4&I1&C1&D2&M0 S7=60 S11=55^M
SoftwareECInit=AT&FV1E0Q0X4&I1&C1&D2&M0 S7=60 S11=55^M
NoDialTone=NO DIAL TONE
NoCarrier=NO ANSWER

[Cermetek 1200 Modem/1200 SPC/Security Modem]
Init=ATE0Q0V1X2&C1 S7=60 S11=55 S0=0^M
SoftwareECInit=ATE0Q0V1X2&C1 S7=60 S11=55 S0=0^M
NoDialTone=NO DIAL TONE

[Cermetek 2400 R/2400 SPC]
Init=ATE0Q0V1X4&C1 S7=60 S11=55 S0=0^M
SoftwareECInit=ATE0Q0V1X4&C1 S7=60 S11=55 S0=0^M
NoDialTone=NO DIAL TONE

[Codex 2264]

[Complete PC Turbo Modem Series 14.4]
Init=AT&F2E0Q0V1X4&C1&D2 S7=60 S11=55 S0=0^M
SoftwareECInit=AT&F2E0Q0V1X4&C1&D2 S7=60 S11=55 S0=0^M

[Dell FAX Modem]
Init=AT&FE0Q0V1X4&C1&D2 S7=60 S11=55^M
SoftwareECInit=AT&FE0Q0V1X4&C1&D2 S7=60 S11=55^M

[Delta Gold DM 1200]
Init=ATE0Q0V1X4&C1 S7=60 S11=55 S0=0^M
SoftwareECInit=ATE0Q0V1X4&C1 S7=60 S11=55 S0=0^M
NoDialTone=NO DIAL TONE

[Digicom Eagle 14.4]
Init=AT&FE0Q0V1X4&C1&D2*F3*E5*M0 S7=60 S11=55^M
SoftwareECInit=AT&FE0Q0V1X4&C1&D2*F3*E5*M0 S7=60 S11=55^M

[Encore 2400 HB-PC 2 Internal Modem]
Init=ATE0Q0V1X4&C1&D2 S7=60 S11=55^M
SoftwareECInit=ATE0Q0V1X4&C1&D2 S7=60 S11=55^M
NoDialTone=NO DIAL TONE

[Everex Evercom 12e]
Init=ATE0Q0V1X4 S7=60 S11=55 S0=0^M
SoftwareECInit=ATE0Q0V1X4 S7=60 S11=55 S0=0^M

[Everex Evercom 24e]

[EverFree Modem 2400]
Init=AT&FE0Q0V1X4&C1&D2 S7=60 S11=55 S0=0^M
SoftwareECInit=AT&FE0Q0V1X4&C1&D2 S7=60 S11=55 S0=0^M

[Fabritech CTS 212AH Companion]
Init=ATE0Q0V1X4&C1 S7=60 S11=55 S0=0^M
SoftwareECInit=ATE0Q0V1X4&C1 S7=60 S11=55 S0=0^M
NoDialTone=NO DIAL TONE
NoCarrier=NO ANSWER

[FreeCom 9600 FAX/Modem]
Init=AT&FE0Q0V1X4&C1&D2 S7=60 S11=55 ^M
SoftwareECInit=AT&FE0Q0V1X4&C1&D2 S7=60 S11=55 ^M
Connect2400=CARRIER2400
Connect9600=CARRIER9600

[FreeCom Winfast 14.4]
Init=AT&FE0Q0V1X4&C1&D2&W S7=60 S11=55 S0=0^M
SoftwareECInit=AT&FE0Q0V1X4&C1&D2&W S7=60 S11=55 S0=0^M

[Gateway 2000 TelePath]
Init=AT&FV1E0Q0&K3X4&C1&D2 S7=60 S11=55^M
SoftwareECInit=AT&FV1E0Q0&K3X4&C1&D2 S7=60 S11=55^M

[Hayes Compatible Modem]

[Hayes Compatible Modem (1200 Baud)]
Init=ATE0Q0V1X4&C1 S7=60 S11=55 S0=0^M
SoftwareECInit=ATE0Q0V1X4&C1 S7=60 S11=55 S0=0^M

[Hayes Optima Series 144 FAX Modem V.32]
Init=AT&FV1E0Q0X4&C1&D2&Q0&B1S7=70S0=0S11=55S46=0S36=5S48=128^M
SoftwareECInit=AT&FV1E0Q0X4&C1&D2&Q0&B1S7=70S0=0S11=55S46=0S36=5S48=128^M

[Hayes Personal Modem 1200]

[Hayes Personal Modem 2400]
Init=ATE0Q0V1X4&C1&D2 S0=0^M
SoftwareECInit=ATE0Q0V1X4&C1&D2 S0=0^M

[Hayes Smartmodem 1200/1200B]
Init=ATE0Q0V1X4&C1 S7=60 S11=55 S0=0^M
SoftwareECInit=ATE0Q0V1X4&C1 S7=60 S11=55 S0=0^M

[Hayes Smartmodem 2400/2400B]

[Hayes Smartmodem V Series 2400/2400B]

[Hayes Smartmodem V Series 9600/9600B V.32]
Init=AT&FV1E0Q0X4&Q0&C1&D2 S7=60^M
SoftwareECInit=AT&FV1E0Q0X4&Q0&C1&D2 S7=60^M

[Hayes V Series 2400/2400B V.42]
Init=AT&FV1E0Q0X4&Q0&C1&D2 S36=3^M
SoftwareECInit=AT&FV1E0Q0X4&Q0&C1&D2 S36=3^M

[Hayes V Series 9600/9600B V.42]
Init=AT&FV1E0Q0X4&C1&D2&Q0 S7=70 S11=55 S36=3 S46=1 S48=0^M
SoftwareECInit=AT&FV1E0Q0X4&C1&D2&Q0 S7=70 S11=55 S36=3 S46=1 S48=0^M

[Hayes V Series Ultra 96]
Init=AT&FV1E0Q0X4&Q0L0&C1&D2 S36=3^M
SoftwareECInit=AT&FV1E0Q0X4&Q0L0&C1&D2 S36=3^M

[IBM Modem 1200  (5841)]
Init=ATE0Q0V1X4&C1 S7=60 S11=55 S0=0^M
SoftwareECInit=ATE0Q0V1X4&C1 S7=60 S11=55 S0=0^M

[IBM PC 2400 bps Modem]

[Identity 9600 MNP/V.42/V.42bis]
Init=AT&F2E0Q0V1X4&C1&D2&R0 S7=60 S11=55 S0=0^M
SoftwareECInit=AT&F2E0Q0V1X4&C1&D2&R0 S7=60 S11=55 S0=0^M

[Intel 2400B]
Init=AT&FV1E0Q0X4&C1S11=55^M
SoftwareECInit=AT&FV1E0Q0X4&C1S11=55^M

[Intel 2400B MNP]
Init=AT&FV1E0Q0X4&C1S11=55^M
SoftwareECInit=AT&FV1E0Q0X4&C1S11=55^M

[Intel 2400EX MNP]
Init=AT&FV1E0Q0X4&C1 S11=55^M
SoftwareECInit=AT&FV1E0Q0X4&C1 S11=55^M

[Intel 9600EX]
Init=AT&FV1E0Q0X4&C1&D2\G\Q3\V0%C0\N0 S7=60^M
SoftwareECInit=AT&FV1E0Q0X4&C1&D2\G\Q3\V0%C0\N0 S7=60^M

[Intel SatisFAXtion Board]
Init=AT&FV1E0Q0X4&C1^M
SoftwareECInit=AT&FV1E0Q0X4&C1^M

[Intel SatisFAXtion Board 400 14.400]
Init=AT&FV1E0Q0X4&C1&D2\Q3 S7=60 S11=55^M
SoftwareECInit=AT&FV1E0Q0X4&C1&D2\Q3 S7=60 S11=55^M

[Maxwell Modem 1200PC/1200V]
Init=ATE0Q0V1X4&C1S0=0^M
SoftwareECInit=ATE0Q0V1X4&C1S0=0^M
NoDialTone=NO DIAL TONE

[Megahertz 14.4 Pocket Fax Modem]
Init=AT&FE0Q0V1X4&C1&D2&Q5&K3 S7=60 S11=55^M
SoftwareECInit=AT&FE0Q0V1X4&C1&D2&Q5&K3 S7=60 S11=55^M

[MegaHertz EasyTalk 1200]
Init=ATE0Q0V1X4&C1 S7=60 S11=55 S0=0^M
SoftwareECInit=ATE0Q0V1X4&C1 S7=60 S11=55 S0=0^M
NoDialTone=NO DIAL TONE

[MegaHertz EasyTalk 2400]
NoDialTone=NO DIAL TONE
NoCarrier=NO ANSWER

[Megahertz PCMCIA 14.4 FAX Modem XJ1144]
Init=AT&FE0Q0V1X4&C1&D2&Q5&K3&R0W1 S7=60 S11=55^M
SoftwareECInit=AT&FE0Q0V1X4&C1&D2&Q5&K3&R0W1 S7=60 S11=55^M

[Megahertz PCMCIA 9600 FAX Modem XJ1960]
Init=AT&FE0Q0V1X4&C1&D2&Q5&K3&R0W1 S7=60 S11=55^M
SoftwareECInit=AT&FE0Q0V1X4&C1&D2&Q5&K3&R0W1 S7=60 S11=55^M

[MicroCom AX Series]
NoDialTone=NO DIAL TONE
NoCarrier=NO ANSWER

[MicroCom QX 4232 HS]
Init=AT&FV1E0Q0X4\G1&C1&D2%C0\N3 S7=60 S11=55^M
SoftwareECInit=AT&FV1E0Q0X4\G1&C1&D2%C0\N3 S7=60 S11=55^M
NoDialTone=NO DIAL TONE
NoCarrier=NO ANSWER

[MicroCom QX V.32c]
Init=AT&FV1E0Q0&K3\G1X3&C1&D2%C0\N3&Q5S7=60S48=7S36=1S46=136"
SoftwareECInit=AT&FV1E0Q0&K3\G1X3&C1&D2%C0\N3&Q5S7=60S48=7S36=1S46=136"
NoDialTone=NO DIAL TONE
NoCarrier=NO ANSWER

[MicroCom QX V.32c Cellular]
Init=AT&FV1^M~ATE0Q0&K3X3&C1 S7=60 S11=55 S0=0^M
SoftwareECInit=AT&FV1^M~ATE0Q0&K3X3&C1 S7=60 S11=55 S0=0^M
NoDialTone=NO DIAL TONE
NoCarrier=NO ANSWER

[MicroPort 42/32 bis]
Init=AT&FE0Q0V1X4&C1&D2\G1\N3 S7=60 S11=55^M
SoftwareECInit=AT&FE0Q0V1X4&C1&D2\G1\N3 S7=60 S11=55^M

[MultiTech MultiModem 224/224PC]
Init=ATE0Q0V1X4&C1&D0&E0&E4&E14 S7=60 S11=55 S0=0^M
SoftwareECInit=ATE0Q0V1X4&C1&D0&E0&E4&E14 S7=60 S11=55 S0=0^M
NoDialTone=NO DIAL TONE

[MultiTech MultiModem 224E/224EC/PC3]
Init=AT&FV1E0Q0X4&C1&D0&E0&E4&E11&E14&R0 S7=60 S11=55 S0=0^M
SoftwareECInit=AT&FV1E0Q0X4&C1&D0&E0&E4&E11&E14&R0 S7=60 S11=55 S0=0^M
NoDialTone=NO DIAL TONE

[MultiTech MultiModem V.32]
Init=AT&FE0Q0V1X4&C1&D2&E1&E4&E6&E8&E10&E13&E15 S7=120 S11=55 S0=0^M
SoftwareECInit=AT&FE0Q0V1X4&C1&D2&E1&E4&E6&E8&E10&E13&E15 S7=120 S11=55 S0=0^M
NoDialTone=NO DIAL TONE

[NEC N2431/2431C]
Init=AT&FV1<C1T1QE0"
SoftwareECInit=AT&FV1<C1T1QE0"
NoDialTone=NO DIAL TONE
NoCarrier=NO ANSWER

[Novation Professional 2400]
Init=ATE0Q0V1X3YC0YF1YT0&C1 S7=45 S0=0^M
SoftwareECInit=ATE0Q0V1X3YC0YF1YT0&C1 S7=45 S0=0^M
NoDialTone=NO TONE

[Novation Smart-Cat 103/212]
Init="N 2 C0^M
SoftwareECInit="N 2 C0^M
ToneDial=~^N~D~ ~
HangUp="~~~^N~H ^M
Connect300=READY
Connect1200=READY
Connect2400=READY
Connect4800=READY
Connect9600=READY
NoDialTone=NO DIAL
NoCarrier=CONN LOST

[Okidata CLP 296]
Init=AT&FV1ATE0Q0V1X4&C1^M
SoftwareECInit=AT&FV1ATE0Q0V1X4&C1^M

[Okidata Okitel 1200/1200B]
Init=ATE0Q0V1X4&C1 S7=60 S11=55 S0=0^M
SoftwareECInit=ATE0Q0V1X4&C1 S7=60 S11=55 S0=0^M

[Okidata Okitel 2400 Plus/2400B Plus]
Init=AT&FV1E0Q0X4&C1^M
SoftwareECInit=AT&FV1E0Q0X4&C1^M

[Okidata Okitel 2400/2400B]

[Okidata Okitel 9600]

[PDI Modem at 9600 Baud]
Init=ATE0Q0V1X4&C1&D2&Q0 S7=60 S11=55 S0=0^M
SoftwareECInit=ATE0Q0V1X4&C1&D2&Q0 S7=60 S11=55 S0=0^M

[Pocket Genius 3 9600 V.42]
Init=AT&F2E0Q0V1X4&C1&D2&Q7&K3 S7=60 S11=55 S0=0^M
SoftwareECInit=AT&F2E0Q0V1X4&C1&D2&Q7&K3 S7=60 S11=55 S0=0^M

[Practical Peripherals 14.4 FX V.32 bis Internal]
Init=AT&FE0Q0V1X4&C1&D2 S7=60 S11=55 S46=0 S48=128^M
SoftwareECInit=AT&FE0Q0V1X4&C1&D2 S7=60 S11=55 S46=0 S48=128^M

[Practical Peripherals 2400SA]
Init=AT&FV1^M~~ATE0Q0V1X4&C1S7=60 S11=55^M
SoftwareECInit=AT&FV1^M~~ATE0Q0V1X4&C1S7=60 S11=55^M

[Practical Peripherals PM9600SA V.32]
Init=AT&FV1E0Q0&C1X4^M
SoftwareECInit=AT&FV1E0Q0&C1X4^M

[Practical Peripherals Pocket Modem 14.4 FX]
Init=AT&FE0Q0V1X4&C1&D2W1 S7=60 S11=55^M
SoftwareECInit=AT&FE0Q0V1X4&C1&D2W1 S7=60 S11=55^M

[Practical Peripherals Practical Modem1200]
Init=AT&FE0Q0V1X4&C1&D2 S7=60 S11=55 S0=0^M
SoftwareECInit=AT&FE0Q0V1X4&C1&D2 S7=60 S11=55 S0=0^M

[Practical Peripherals Practical Modem2400]
Init=ATE0Q0V1X4&C1&D2 S11=55 S0=0 S7=60^M
SoftwareECInit=ATE0Q0V1X4&C1&D2 S11=55 S0=0 S7=60^M

[Prometheus 14.400]
Init=AT&F2V1E0Q0X4&C1&D2^M
SoftwareECInit=AT&F2V1E0Q0X4&C1&D2^M
NoDialTone=NO DIAL TONE

[Prometheus 2400 MCT-24I Half-card]
NoDialTone=NO DIAL TONE

[Prometheus 9600 MNP]
Init=AT&F2V1E0Q0X4&C1&D2^M
SoftwareECInit=AT&F2V1E0Q0X4&C1&D2^M
NoDialTone=NO DIAL TONE

[Prometheus Pro Modem 1200]
Init=ATE0Q0V1X4&C1 S7=60 S11=55 S0=0^M
SoftwareECInit=ATE0Q0V1X4&C1 S7=60 S11=55 S0=0^M
NoDialTone=NO DIAL TONE

[Racal-Milgo RMD 3221]
Init=AT&FV1E0X9&C1&D2*F2 S7=60 S11=55 S0=0^M
SoftwareECInit=AT&FV1E0X9&C1&D2*F2 S7=60 S11=55 S0=0^M
NoDialTone=NO DIAL TONE
NoCarrier=NO ANSWER

[Racal-Vadic 1200PA]
Init=AT&FV1E0&C1&D2Q0X4^M
SoftwareECInit=AT&FV1E0&C1&D2Q0X4^M
NoCarrier=NO ANSWER

[Racal-Vadic 2400/PS]
Init=AT&FV1E0Q0X4&C1S7=60S11=55^M
SoftwareECInit=AT&FV1E0Q0X4&C1S7=60S11=55^M
NoDialTone=NO DIAL TONE

[Racal-Vadic 2400LC]
Init=AT&FV1E0Q0X4&C1S7=60S11=55^M
SoftwareECInit=AT&FV1E0Q0X4&C1S7=60S11=55^M
NoDialTone=NO DIAL TONE

[Racal-Vadic 2400PA]
Init="^E^M~~O^M~1^M~1^M~4^M~2^M~~^M
SoftwareECInit="^E^M~~O^M~1^M~1^M~4^M~2^M~~^M
ToneDial=^E^M~~~D^M~
HangUp="^CD^M
Connect300=ON LINE
Connect1200=ON LINE
Connect2400=ON LINE
Busy=BUSY!
NoDialTone=NO DIAL TONE
NoCarrier=FAILED CALL

[Racal-Vadic 2400PA Model 2]
Init=AT&FV1E0Q0X4&C1S7=60S11=55^M
SoftwareECInit=AT&FV1E0Q0X4&C1S7=60S11=55^M
NoDialTone=NO DIAL TONE

[Racal-Vadic 2400VP]
NoDialTone=NO DIAL TONE

[Racal-Vadic 9600VP]
Init=AT&FV1E0Q0X4&C1S7=60^M
SoftwareECInit=AT&FV1E0Q0X4&C1S7=60^M
NoDialTone=NO DIAL TONE

[Racal-Vadic 9632PA]

[Racal-Vadic LC2400PC]
Init=AT&FV1E0Q0X4&C1S7=60 S11=55^M
SoftwareECInit=AT&FV1E0Q0X4&C1S7=60 S11=55^M
NoDialTone=NO DIAL TONE

[Racal-Vadic VA3451]
Init="^E^M
SoftwareECInit="^E^M
ToneDial=D^M~~
Connect300=ON LINE
Connect1200=ON LINE
NoDialTone=NO DIAL TONE
NoCarrier=FAILED

[ROLM PBX]
Init=^M
SoftwareECInit=^M
ToneDial="C "
Connect2400="CALL COMPLETE"
NoCarrier="source"
Ok=MODIFY?

[Shiva NetModem/E]
Init=AT&FE0X2 S11=55 S0=0 S46=136 S49=249^M
SoftwareECInit=AT&FE0X2 S11=55 S0=0 S46=136 S49=249^M

[Star 9600]
Init=AT&FV1E0Q0X4&C1&D2 S7=60 S11=55 S0=0^M
SoftwareECInit=AT&FV1E0Q0X4&C1&D2 S7=60 S11=55 S0=0^M

[Supra 2400 baud]
Init=AT&FE0Q0V1X4&C1&D2 S7=60 S11=55^M
SoftwareECInit=AT&FE0Q0V1X4&C1&D2 S7=60 S11=55^M

[Supra Modem 14400 V.32 bis]
Init=AT&F2V1E0Q0X4&C1&D2 S7=60 S11=55 S0=0^M
SoftwareECInit=AT&F2V1E0Q0X4&C1&D2 S7=60 S11=55 S0=0^M

[Sysdyne MDM 24H]
NoDialTone=NO DIAL TONE
NoCarrier=NO ANSWER

[Tandy 1200-bps Half Card]
Init=ATE0Q0V1X4&C1 S7=60 S11=55 S0=0^M
SoftwareECInit=ATE0Q0V1X4&C1 S7=60 S11=55 S0=0^M

[Tandy 2400-bps fax 24/96]
Init=AT&FE0Q0V1X4&C1&D2 S7=60 S11=55^M
SoftwareECInit=AT&FE0Q0V1X4&C1&D2 S7=60 S11=55^M

[Telebit T1500]
Init=ATE0Q0V1X1&C1&D2 S7=60 S11=55 S0=0^M
SoftwareECInit=ATE0Q0V1X1&C1&D2 S7=60 S11=55 S0=0^M
NoDialTone=NO DIAL TONE

[Telebit T2000]
Init=ATE0Q0V1X1&C1&D2 S7=60 S11=55 S0=0^M
SoftwareECInit=ATE0Q0V1X1&C1&D2 S7=60 S11=55 S0=0^M
NoDialTone=NO DIAL TONE

[Telebit T2500]
Init=AT&F1E0Q0V1X1&C1&D2&K3 S7=60 S11=55 S0=0 S50=6 S131=1 S66=1 S97=1 S106=1 S98=0^M
SoftwareECInit=AT&F1E0Q0V1X1&C1&D2&K3 S7=60 S11=55 S0=0 S50=6 S131=1 S66=1 S97=1 S106=1 S98=0^M
NoDialTone=NO DIAL TONE

[Telebit Trailblazer]
Init=ATE0Q0V1X1&C1&D2 S7=60 S11=55 S0=0
SoftwareECInit=ATE0Q0V1X1&C1&D2 S7=60 S11=55 S0=0
NoDialTone=NO DIAL TONE

[The Maxwell Modem 1200VP]
Init=ATE0Q0V1X4&C1&D2 S7=60 S0=0^M
SoftwareECInit=ATE0Q0V1X4&C1&D2 S7=60 S0=0^M
NoDialTone=NO DIAL TONE

[The Maxwell Modem 2400PC]
Init=ATE0Q0V1X4&C1 S7=30 S0=0^M
SoftwareECInit=ATE0Q0V1X4&C1 S7=30 S0=0^M
NoDialTone=NO DIAL TONE
NoCarrier=NO ANSWER

[Tradewind Smartlink 2400 Internal]
Init=AT&FE0Q0V1X4&C1&D2 S7=60 S11=55^M
SoftwareECInit=AT&FE0Q0V1X4&C1&D2 S7=60 S11=55^M

[Twincom 144 /DFI]
Init=AT&FE0Q0V1X4&C1&D2&K3&Q5 S48=7 S7=60 S11=55 S0=0^M
SoftwareECInit=AT&FE0Q0V1X4&C1&D2&K3&Q5 S48=7 S7=60 S11=55 S0=0^M
Connect9600=CARRIER9600
Connect14400=CARRIER14400
NoDialTone=NO DIAL TONE

[Universal Data Systems Fastalk 2400]
Init=ATE0Q0V1X4&C1&D2 S7=60 S0=0^M
SoftwareECInit=ATE0Q0V1X4&C1&D2 S7=60 S0=0^M
NoDialTone=NO DIAL TONE

[US Robotics 2400PC]
Init=ATE0Q0V1X4&C1&D2&H1 S7=60 S11=55 S0=0^M
SoftwareECInit=ATE0Q0V1X4&C1&D2&H1 S7=60 S11=55 S0=0^M
NoDialTone=NO DIAL TONE

[US Robotics Courier 2400]
Init=ATE0Q0V1X6&C1&D2&H1 S7=60 S11=55 S0=0^M
SoftwareECInit=ATE0Q0V1X6&C1&D2&H1 S7=60 S11=55 S0=0^M
NoDialTone=NO DIAL TONE

[US Robotics Courier 2400e/ 2400e/ps]
NoDialTone=NO DIAL TONE

[US Robotics Courier 2400PC]
NoDialTone=NO DIAL TONE

[US Robotics HST]
NoDialTone=NO DIAL TONE

[US Robotics HST V.42]
NoDialTone=NO DIAL TONE

[US Robotics HST/Courier Dual Standard]
Init=AT&FV1E0Q0X6&A0B0&K0&M4&H1 S7=120 S11=55 S0=0^M
SoftwareECInit=AT&FV1E0Q0X6&A0B0&K0&M4&H1 S7=120 S11=55 S0=0^M
NoDialTone=NO DIAL TONE

[US Robotics Sportster 1200/1200 PC]
Init=ATE0Q0V1X2&C1 S7=60 S11=55 S0=0^M
SoftwareECInit=ATE0Q0V1X2&C1 S7=60 S11=55 S0=0^M
NoDialTone=NO DIAL TONE

[US Robotics Sportster 14400 fax Modem]
Init=AT&FV1E0Q0X4&C1&D2&R2&H1^M
SoftwareECInit=AT&FV1E0Q0X4&C1&D2&R2&H1^M
NoDialTone=NO DIAL TONE

[US Robotics Sportster 2400/2400 PC]
Init=AT&FV1E0Q0X4&C1&D2 S7=60 S11=55 S0=0^M
SoftwareECInit=AT&FV1E0Q0X4&C1&D2 S7=60 S11=55 S0=0^M
NoDialTone=NO DIAL TONE

[US Robotics V.32]
NoDialTone=NO DIAL TONE

[Ven-Tel 212Plus]
Init=ATE0Q0V1X4&C1 S7=60 S11=55 S0=0^M
SoftwareECInit=ATE0Q0V1X4&C1 S7=60 S11=55 S0=0^M
Connect300=ON LINE
Connect1200=ON LINE

[Ven-Tel Halfcard]
Init=ATE0Q0V1X4&C1 S7=60 S0=0^M
SoftwareECInit=ATE0Q0V1X4&C1 S7=60 S0=0^M
NoDialTone=NO DIAL TONE

[Ven-Tel Halfcard 24]
Init=ATE0Q0V1X4&C1 S7=30 S0=0^M
SoftwareECInit=ATE0Q0V1X4&C1 S7=30 S0=0^M
NoDialTone=NO DIAL TONE

[Viva 9642 e]
Init=AT&FV1E0Q0X4&C1 S7=60 S11=55 S0=0^M
SoftwareECInit=AT&FV1E0Q0X4&C1 S7=60 S11=55 S0=0^M

[Viva 9642 i]
Init=AT&F2E0Q0V1X4&C1 S7=60 S11=55 S0=0^M
SoftwareECInit=AT&F2E0Q0V1X4&C1 S7=60 S11=55 S0=0^M

[Viva Fax Modem 2496 IF]
Init=AT&FV1E0Q0X4&C1&D2 S7=60 S11=55 S0=0^M
SoftwareECInit=AT&FV1E0Q0X4&C1&D2 S7=60 S11=55 S0=0^M

[Zoltrix 96/24 Fax Modem]
Init=ATE0Q0V1X4&C1&D2 S7=60 S11=55^M
SoftwareECInit=ATE0Q0V1X4&C1&D2 S7=60 S11=55^M
NoDialTone=NO DIAL TONE

[Zoom 14.4 Fax Modem]
Init=AT&FE0Q0V1X4&C1&D2&K3&Q5 S7=60 S11=55 S0=0 S48=7^M
SoftwareECInit=AT&FE0Q0V1X4&C1&D2&K3&Q5 S7=60 S11=55 S0=0 S48=7^M
Connect14400=CARRIER14400
NoDialTone=NO DIAL TONE

[Zoom 2400 Pocket FAX Modem]
Init=AT&FE0Q0V1X4&C1&D2 S7=60 S11=55^M
SoftwareECInit=AT&FE0Q0V1X4&C1&D2 S7=60 S11=55^M

[Zoom 9600 V.32 Fax Modem]
Init=AT&FE0Q0V1X4&C1&D2&K3&Q5 S7=60 S11=55 S0=0^M
SoftwareECInit=AT&FE0Q0V1X4&C1&D2&K3&Q5 S7=60 S11=55 S0=0^M
NoDialTone=NO DIAL TONE

[Zoom Modem PC 1200]
Init=ATE0Q0V1X4&C1 S7=60 S11=55 S0=0^M
SoftwareECInit=ATE0Q0V1X4&C1 S7=60 S11=55 S0=0^M
NoDialTone=NO DIAL TONE

[Zoom Modem PC 2400]
NoDialTone=NO DIAL TONE

[Zyxel U-1496 ]

